University of Isfahan Iranian Journal of Environmental Technology  2423-5776 2 1 2016 04 01 Comparison of central composite design and artificial neural network approaches for modeling and optimization of 2-methylpropane-2-thiol removal from contaminated soil by ultrasound Comparison of central composite design and artificial neural network approaches for modeling and optimization of 2-methylpropane-2-thiol removal from contaminated soil by ultrasound 11 26 21064 10.22108/ijet.2016.21064 EN Pejman Roohi Ph.D. Student of Chemical engineering, Environmental Engineering Research Center (EERC), Sahand University of Technology, Sahand New Town, Tabriz, Iran Esmaeil Fatehifar Professor of Chemical engineering, Environmental Engineering Research Center (EERC), Sahand University of Technology, Sahand New Town, Tabriz, Iran Reza Alizadeh Associate Professor of Chemical Engineering, Environmental Engineering Research Center (EERC), Sahand University of Technology, Sahand New Town, Tabriz, Iran Journal Article 2016 01 27 In this article a comparative study for modeling and optimization of <em>2-methylpropane-2-thiol </em>removal from contaminated soil by ultrasound is investigated. Central Composite Design (CCD) and artificial neural network (ANN) were utilized and compared to each other in order to obtain appropriate predicting model with respect to sonication power (w), sonication time (min) and water/reactor volume ratio (ml/ml). CCD was used based on Response Surface Model (RSM) and the ANN model was developed by the Levenberg−Marquardt feed forward back-propagation training algorithm and topology (3:8:1). Analysis of variance and Pareto analysis resulted from CCD demonstrate that sonication power is the most influential parameter on <em>2-methylpropane-2-thiol </em>removal efficiency (sonication time and amount of added water in the next order respectively). This is confirmed by ANN model. Also interaction between water content and power, sonication time and power are effective interaction (P-values=0.025 and 0.007 respectively). Comparison between CCD and ANN methods demonstrate that ANN model has excellent predicting power compared to CCD model and both of them show good agreement with experimental values with high correlation coefficients (<em>R²_ANN=98.39%, R²_CCD=96.34%</em>). Optimized condition suggests that for maximum removal efficiency (82.83%), power and sonication time must be in highest level and water/reactor volume ratio must be in lowest level in the studied interval. <strong> </strong> <strong>Highlights</strong> Soil polluted with <em>2-methylpropane-2-thiol </em>is remediated with sonication process. The effects of the sonication power (w), sonication time (min) and water/reactor volume ratio (ml/ml) are added to the batch reactor as the main factor and interaction between them are investigated. For preparing the best experimental model CCD and ANN methods are used and compared to each other.  In this article a comparative study for modeling and optimization of <em>2-methylpropane-2-thiol </em>removal from contaminated soil by ultrasound is investigated. Central Composite Design (CCD) and artificial neural network (ANN) were utilized and compared to each other in order to obtain appropriate predicting model with respect to sonication power (w), sonication time (min) and water/reactor volume ratio (ml/ml). CCD was used based on Response Surface Model (RSM) and the ANN model was developed by the Levenberg−Marquardt feed forward back-propagation training algorithm and topology (3:8:1). Analysis of variance and Pareto analysis resulted from CCD demonstrate that sonication power is the most influential parameter on <em>2-methylpropane-2-thiol </em>removal efficiency (sonication time and amount of added water in the next order respectively). This is confirmed by ANN model. Also interaction between water content and power, sonication time and power are effective interaction (P-values=0.025 and 0.007 respectively). Comparison between CCD and ANN methods demonstrate that ANN model has excellent predicting power compared to CCD model and both of them show good agreement with experimental values with high correlation coefficients (<em>R²_ANN=98.39%, R²_CCD=96.34%</em>). Optimized condition suggests that for maximum removal efficiency (82.83%), power and sonication time must be in highest level and water/reactor volume ratio must be in lowest level in the studied interval. <strong> </strong> <strong>Highlights</strong> Soil polluted with <em>2-methylpropane-2-thiol </em>is remediated with sonication process. The effects of the sonication power (w), sonication time (min) and water/reactor volume ratio (ml/ml) are added to the batch reactor as the main factor and interaction between them are investigated. For preparing the best experimental model CCD and ANN methods are used and compared to each other.  https://ijet.ui.ac.ir/article_21064_6e90c9d89015a9f0596963788902cf9c.pdf